Pages Menu
BIK Hydraulics PM HEILA MANITOU USTB BIK Series Forming Crane Elliott Boom Truck Elliott HiReach SANY BIK Series 3WD Forklifts
Categories Menu
*** SOLD *** – 2005 INTERNATIONAL 4300 S/A with ELLIOTT HiREACH G85 – 33,000 lb GVWR – AIR BRAKES

*** SOLD *** – 2005 INTERNATIONAL 4300 S/A with ELLIOTT HiREACH G85 – 33,000 lb GVWR – AIR BRAKES

Truck Details:

PRE-OWNED – 2005 INTERNATIONAL 4300  SINGLE AXLE TRUCK:  33,000 lb GVWR – Air Brakes – 118,000 Miles

  • Max-Force DT 245 HP International DT Diesel Engine
  • 6 Speed Manual Transmission
  • 156”  Back of Cab to Axle
  • 224” WB
  • Truck Cab White in Colour
  • 12,000 lb Front Axle with 11R22.5 Tires
  • 21,000 lb Rear Axle on 23,500 Rated Rear Spring Suspension with 11R22.5 Tires
  • 4.30 Rear Axle Ratio
  • Features Include:  A/C, AM/FM Stereo, Cruise Control, Tilt Steering, Trailer Air Tow Package From Factory – Plumbed to Rear, High-Back Driver’s Air Seat, 2-Man Passenger Bench Seat, 50-Gal Fuel Tank, Painted Steel Bumper with (2) Tow Hooks, Chrome Grill, Block Heater, Heated Mirrors, etc…

Boom Details:

ELLIOTT  G85 R HiREACH – 4-Section Hydraulic Reach to 85’ Vertical Reach with 85’ Working Height, 74’ Horizontal Reach

  • Electronic Proportional Three Stick Controls on Platform
  • Manual Ground Controls Located on Side of Start/Stop From Upper and Lower Controls.
  • Two Exposed Cable Carriers to Boom Tip
  • Hydraulic Self-Leveling and Rotating 30” x 54” EZR Work Platform with Remote Leveling from Platform.
  • Platform Capacity – 500 lbs
  • One Double Acting  7” Full Displacement Long Stroke Boom Elevation Cylinder Provides Smooth, Stable Elevation
  • Continuous Off-set Turret Rotation with No Stops with Ball Bearing, Slewing Bearing and Self-Locking Gear Box
  • Hydraulic OUT and DOWN  “MH” Stabilizers at Base with a 18’ Spread, “A” Frame Secondary Stabilizers at Front
  • Load Holding Valves on Each Cylinder for Safety and Security of Operator and Load


Also Included:

  • 16’ x 96” Steel Bed         
  • 110 Volt Line to Platform                   
  • Sign Forks at Platform
  • Truck Cab Guard and Access Platform From Back of Cross Box to Edge of Windshield (102” Wide), Ramp Continuing to Bucket
  • 5,900 lb Planetary Winch w/Anti-Two Block Switch, Horn, Two-Part Hook and 130’ of 3/8” Cable
  • Platform Mounted Jib with Hydraulic Winch Drum in Floor with 500 lbs Capacity
  • Complete with Several Under-Deck Storage Boxes

Well Maintained Unit – Clean and Ready to Work !

Call 888-557-2244  or  416-679-3838

Download PDF