bik hydraulics bik hydraulics ltd boom trucks new boom trucks used boom trucks pre-owned boom trucks hydraulic cranes knuckle booms heavy cranes trailer mounted unloaders image About Us

Contact Us		 INVENTORY
New & Used

Knuckle Booms
Info & Specs

"Piggy-Back"
Info & Specs

Trolley Booms
Info & Specs

POWERLIFTô300 SERIES

Telescoping Cranes For the handling of Heavy Precast  Products up to 33,000 lbs. capacity

 

bik hydraulics powerlift telescoping cranes cranes telescoping lift trucks telescoping booms ustc image

 

USTC's  POWERLIFTô two and three-section telescoping cranes are designed to pick up 15 tons at a 10' radius. Light boom weight to lift capacity ratio allow the largest payloads in the industry. Long telescopic reach enables exact placement of the load on the work site and the ability to reach the length of a pup trailer for greater payloads. Fully hydraulic sequential booms provide smooth telescopic performance. Heavy capacity high speed hoist is equipped with two automatic braking systems. Fully proportional operator control station rotates continuously with the boom for excellent load visibility. Optional remote control system provides the operator job-site freedom of movement, operator protection against electrical hazards and allows for labor saving one-man operation. Rugged pedestal for truck or trailer mounting protects hydraulic and electrical components and makes them easily accessible for maintenance. All USTC products are backed by USTC's unparalleled full one year warranty and sold and serviced by our world-wide factory-trained distributor network.

 

bik hydraulics powerlift telescoping cranes cranes telescoping lift trucks telescoping booms ustc image

 

bik hydraulics powerlift telescoping cranes cranes telescoping lift trucks telescoping booms ustc image

 

THE OPERATOR'S CHOICE

 

  • Twin elevate cylinders reduce boom twist and side loading effects.
  • Low pressure, open-center hydraulic valves provide longer component wear and reduced hydraulic maintenance.
  • Proven pistol grip single function proportional radio remote or patented SHOCK GUARDÆ pneumatic system will provide optional dual control.
  • Optional hydraulic stabilizers available.
  • Boom constructed of reinforced high tensile steel for increased strength to weight ratio and durability.
  • Rugged pedestal equipped with torsinal stringer channel for truck mounting or bearing riser for trailer installation.
  • Pilot-operated load holding valves on all cylinders prevent accidental load fall should a hydraulic line burst.
  • Wide variety of factory approved forks, lifting devices and equipment options available.
  • Planetary hoist with 1/2" wire rope for multi-part line.
  • Local factory-trained and authorized distribution, installation and service.
  • Continuous boom rotation with heavy duty 42" diameter ring gear, double-reduction gear box  drive and high-torque hydraulic motor.
  • Full 12 months warranty.
  • 18' span hydraulic box-beam out and down outriggers provide increased stability.
  • American Made.
  • Anti-Two block with capacity overload shut down systems are standard equipment.
 

 

 

bik hydraulics powerlift telescoping cranes cranes telescoping lift trucks telescoping booms ustc image

 

PC-16 AND PC-20 SPECIFICATIONS

REF.                DIMENSIONAL DATA PC-18 E PC-16 C      PC-20 C
E   Boom Extension Radius - Minimum
                                             - Maximum  
F   Pedestal Width above Bed                 
G   Center of Gravity from C/L of Rotation
H   Unit Height above Frame or Trailer Deck      
K   Load Clearance  
L   Bed Assembly Thickness
     Hook In
     Hook Out
     Rear Turning Radius
     Maximum Cable Payout from Sheave
     Maximum Sheave Height above Frame
     or Trailer Deck
     Maximum Tip Height above Frame
     or Trailer Deck
     Bearing Riser for Trailer Installation
     Length of Torsional Stringer Channel (6")
                                               		16' 6"
27'
52"
58"
115 1/2" / 113 1/2"
82" / 80"
9" / N/A
16"
26' 6" 
42 1/2"
188'
33'

35'

N/A / 5" x 43" dia
18' / N/A 		24' 4"
34'10"
52"
63"
115 1/2" / 113 1/2"
82" / 80"
9" / N/A
23' 9"
34' 4"
42 1/2"
221'
40'

42'

N/A / 5" x 43" dia
18' / N/A 		24' 8"
45'
52"
80"
115 1/2" / 113 1/2"
82" / 80"
9" / N/A
24¥ 2"
44' 8"
42 1/2"
270'
50'

52'

N/A / 5" x 43" dia
18' / N/A
  WEIGHTS
Basic Unit with BB-18 Out/Down Stabilizer
BB-18 Out/Down Stabilizer
Two Sheave Hookblock                           		11,800 lb.
2,300 lb. 
307 lb.		 12,470 lb.
2,300 lb. 
307 lb.		 13,030 lb.
2,300 lb. 
307 lb.
STANDARD SPECIFICATIONS ALL POWERLIFTSô
Elevation
Continuous Rotation Speed (360ƒ Arc)
Minimum Truck Frame Required

Heavy Duty Trailer Must be Capable of Carrying		 70ƒ
90 seconds
3.6 in-lb. rbm/32.0 sm.
110 psi yield steel
50,000 lb. over 10'span    
                                      
HYDRAULIC SYSTEM
Pump Flow                                        
Recommended Engine Speed                           
Operating Pressure                                  		8 & 21 & 34 gpm
2,000 rpm
2,700 psi
HOIST DATA
Hoist Pull and Speed - Second Layer
Hoist Pull and Speed - Third Layer
Hoist Pull and Speed - Forth Layer
Wire Rope Type 6 x 37
Wire Rope Length 300-25
Wire Rope Length 300-35
Wire Rope Length 300-45
Parts of Line Required 		10,930 lb. @ 174 fpm         10,040 lb. @ 190 fpm
9,280 lb. @ 205 fpm
1/2" EEIPS IWRC
220'
260' 
310'
4
                                                

N/A - Not Applicable
Due to continuous improvements, we reserve the right to make specification or equipment changes without prior notification.

 

bik hydraulics powerlift telescoping cranes cranes telescoping lift trucks telescoping booms ustc image

 

bik hydraulics powerlift telescoping cranes cranes telescoping lift trucks telescoping booms ustc image

 

If you need any additional specific information or specs please  call us

Toll Free at 1-888-557-2244