NEW PM 41014+4S JIB
41 TON/M - 92' VERTICAL REACH
NEW 2009 STERLING LT8513 TRI
NEW 22' FLAT DECK
|
|
|
|
|
- Folding Hydraulic Knuckle Boom mounted behind cab of truck
- 8-Independent Hydraulic - 72’ total horizontal / 84 vertical reach ( w/ Jib) sequentially extended
- 94' vertical reach with 2-extra extnetions in jib
- PM J904 Hydraulic Fly-Jib - 3-Extensions - sequentially extended
- PM connecting rods at First Boom and Knuckle, 400 degree boom rotation
- Double pilot operated on slewing and pilot operated check valves on all cylinders
- Hydraulic Extra Wide Main outriggers at pedestal 25’ 7” span
- Hydraulic Oil Cooler, high pressure return filter and min. 92-gallon oil tank on boom
- 240 degree load chart over rear to rear of cab mirrors (approx) reduced lifting capacity towards the front
- DANFOSS Proportional Control Valve on Column & SCANRECO Proportional Radio Remote Control
- Radio Remote Control includes: 2-batteries, in-cab charger, and back-up cord
- Crane Painted PM Blue Certified Painting Quality System - load chart on boom in FT. & LBS.
- Warranty: 1-Yr. part & labour on entire boom, 3-Yr. on Structural Components
- Load Tested & Installed BACK OF CAB, with integral sub-frame to meet or exceed all CMVSS Standards
|
|
|
|
|
- New 2009 Sterling LT8513 Diesel Truck: 73,000 lb GVWR
- Cummins 330 HP Diesel , Fuller 8LL Trans., 4.63 rear axle ratio, Truck cab white in color
- 20,000 lb fronts on 425/65R22.5 Floatation tires on Steel White Rims,
- 40,000 lb rears on Tuftrac Suspension with 11R22.5 tires on steel white Rims
- 13,000 lb self-steer pusher axle with low profile 22.5 tires on Single steel white Rims
- Approx 276” wheel base, 60” spread at tandems, Full Double Frame chassis
- Truck Options Include: Air Cond., Cruise, am/fm CD stereo, power windows, power door locks, tilt steering, Chrome Bumper and grill,
- Air Ride Cab, Differential locks with full 4-wheel lock ups, heated mirrors, dual 60 gal alum fuel tank, etc.
|
|
|
|
|
- 6” Sub-frame under boom, extended & tied into auxiliary outriggers
- Auxiliary outriggers installed behind tandem drives
- 2-Manual Extension for Jib (10’ additional reach)
- 2 - 36” Aluminum tool box installed, one on each side
|
|
|
|
|
 |
|
 |
|
 |
|
|
|
|
|
|
|
 |
|